Sewing Machine Feet

Web	www.sewingonline.info

Brother SA226CV Coverstitch Top Stitching Foot Set for 2340CV

Top Stitching Set for decorative top stitching. Use this presser foot to easily apply top stitching as with 6mm (15/64") or 3mm (1/8") width 2-needle 3-thread cover stitch at the seam margin with lock stitches.

Brother SA130 Adaptor for using Low Shank screw-on Attachments on Brother high shank PC8200 and Babylock Esante 1

The adapter is used for attaching screw-on presser feet such as the gathering foot to a sewing machine with low shank. Compatible with Brother PC-8200 and Babylock Esante 1.

Brother SA224CV Coverstitch Bias Tape Binding Set for 2340CV

Bias Tape Binding Set for folding and attaching 6 mm (1/4") or 12 mm (1/2") bias tapes to fabric edge. There are two sets of bias binders to accommodate both narrow and wide ready-made bias tape. (or make your own). Narrow: finished width of 6mm (1/4"). Wide: finished width of 12mm (1/2"). Use either size to quickly and easily attach bias tape to the edge of your garment or home dec project.

Brother SA180 Feltscaper Attachment For Use With The Brother PQ1500/S and PQ1300 ONLY

The perfect way to laminate one fabric to another for joining or embellishing any project. What once took hours can now be done in minutes. Unlike the traditional method of handstitching with a 7" felting needle and wet wool, Brother has created an acessory that uses no thread. Instead, each needle has four barbs that catch surface fibers pushing them into and through a base fabric.

Brother SA134 Low Shank Screw-on Adjustable All Metal Blind Stitch Foot for 5mm Zigzag Machines

Adjustable for creating blind hems on a variety of fabrics. This foot is also handy for sewing fabric edges with a fixed seam allowance. The low shank presser foot adaptor is required for PC-8200 and 8500. Compatible with VX, XL, XR series up to 5mm Zigzag.

Brother "J" Foot with stabilizing button for Embroidery Machines #XC3021 051

Push the black button into the ankle to stabilize the foot for sewing over thicknesses. Replacement foot. Companion ankle is required. Combo ankle and foot is SA175.

Brother SA142 Snap-on Fringe All Metal Foot for Tailortacking or Decorative Fringe

Fringe Foot Creates dimensional thread loops on the top surface of the fabric. The foot creates dimensional threads loops on the top surface of the fabric. The loops can be also fringe by sewing with straight stitch along the root of loop and cutting bobbin thread. Accessory Model SA142. Compatible with all our home-use sewing machines.

Brother SA108 Snap on Metal Straight Stitch Foot for 5mm Zigzag Machines

Used for consistent straight stitching on lightweight or sheer fabrics. Also useful in sewing over seams to keep the needle going down the small hole in the foot so it doesn't glance off and hit something underneath. Accessory Model SA108. Compatible with All our home-use sewing machines.

Brother SA148 Snap-on Cording All Metal Foot 3 Hole cording on top of fabric for up to 5mm Zigzag

Cording Foot To attach three or less cords or decorative threads. The foot works perfectly for attaching three cords or threads through grooves on clothing, household linens, etc. Compatible with VX, XL, XR series, PE-300S, PS-1000 to 2100.

Brother Low Shank Presser Foot Holder Assembly #XA8970051

Replacement Ankle for Brother Low Shank Machines. Use with Brother SA131 Low Shank Adapter to allow use of low shank snap-on feet with the high shank Brother embroidery machines.

Brother SA135 Snap-on Overlock Edge Foot for 5mm Zigzag machines

This foot makes a finished edge with overcasting stitch to prevent fabric edges from fraying. Accessory Model SA135. Compatible with VX, XL, XR series and Babylock comparables.

Brother SA137 Seam Guide/Edge Guide for PQ1300/1500

To help make more accurate seams while sewing. Accessory Model SA137. Compatible with PQ1300/1600.

Brother Button Sewing Foot "M" for embroidery machines #130489001

Replacement Button Sewing Foot "M". Drop feed dog and zigzag into the holes of the button. Has sliding adjustment for shank extension.

Brother SA175 New ZigZag Foot and Ankle Combo with leveling button for ULT Machines

Includes the Foot, Ankle and Screw. ZigZag foot can be used for utility stitches from straight stitch to zigzag stitches. Especially useful to promote accurate feeding at the beginning of sewing heavy weight fabrics. Useful for sewing over thick seams, such as on Jeans.

Brother Thumb Screw to hold Presser Foot Adapter to Machine #XA5904051

Replacement Screw for presser foot. For Brother Sewing Machines.

SA 173 High Shank Heavy Weight Foot for Brother PQ 1300/1500S Series

High Shank Industrial Foot. Use Straight Stitch only. Useful for sewing Heavy Weight Fabrics.

SA251 Brother Q+ Embroidery Foot #0112003 01

New style embroidery foot for Brother ULT embroidery machines. Has smaller keyhole opening in foot for better support of fabrics. Helps prevent up and down fabric movement (flagging) while embroidering. Designed for embroidering with ultra-fine threads.

Brother SA146 Snap-on Open Toe Metal Foot with 1/4" Flat Tunnel Underneath

Metal Open Toe Foot To attach appliqu� motifs. This foot is perfectly fitted to appliqueing, matching pattern and etc. The open toe foot gives you greater visibility while sewing. Compatible with PE-300S, PS-1000 to 2500, PC-2800 to 8500 (5-7mm width).

Brother SA109 Snap-on 1/4" Bias Binder All Metal Foot for up to 7mm zigzag sewing machines

Binder Foot For attaching 7/8" cut or 1/4" double folded width bias tape. With a tape guide, this makes an attractive binding similar to pre-folded, using unfolded bias tape. Compatible with low-shank home-use sewing machines.

Brother SA149 Snap-on Picot Edge Metal Foot for 5mm Zig Zag machines

Picot Horizontal/Vertical FootFor shell effect when hemming. Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch especially with lingerie edges. Accessory Model SA149. Compatible with VX, XL, XR series PE-300S, PS-1000 to 2100.

Brother SA126 Snap-on 1/8" Narrow Roll Hemmer Metal Foot for 7mm Zigzag machines

This foot is designed for binding in lightweight fabrics. It makes a narrow rolled hem easily. Compatible with PS-2200 to 2500, PC-2800 to 8500, and ULT's.

Brother SA157 Snap-on Metal Cording Foot 5 Hole Cording for application on top of fabric

Cording Foot For cording work with 5 cords. This foot makes embellishment edges, cuffs, collars, etc with 5 cords. This foot works with zigzag or decorative stitch mode. Stitch over all cords. Accessory Model SA157. Compatible with PS-2200 to 2500, PC-2800 to 8500.

Brother One-Step Buttonhole Foot "A" Part #x57789101

Replacement One-Step Buttonhole Foot "A". For Brother and Baylock Embroidery and Sewing Machines.

Brother SA122 Plastic Non-Stick Teflon Snap-on Foot for 5mm Zigzag Machines

For fabrics which may tend to stick to the bottom of the foot such as leather, vinyl, plastic, synthetics, ultrasuede, etc. Compatible with VX, XL, XR series and Babylock comparables.

Brother One-Step ButtonHole Foot for Mechanical Machines #XA4911121

Replacement foot for one-step buttonholes. Use on Brother mechanical machines.

Brother SA174 Snap-on Metal 7-Groove Pintuck Foot for Double Needle Heirloom Sewing

7 Groove Pintuck Foot. Use with 1.6mm twin needle. Includes bobbin cover with cord guide. Fits PC-3000, PC-6000, PC-6500, PC-2800, PC-8200, PC-8500, and the ULT2001 and ULT2002D and comparable Babylocks.

Brother SA127 1/8" Snap-on Metal Narrow Roll Hemmer Foot for 5mm Zigzag Machines

This foot is designed for binding in lightweight fabrics. It makes a narrow rolled hem easily.

Brother SA177 Snap-on All Metal Side Cutter for up to 7mm Zig Zag Machines

Fits Brother sewing machines with up to 7mm zigzag width.PC-3000, PC-6000, PC-6500, PC-2800, PC-8200, PC-8500, and the ULT2001, ULT2002D and ULT2003D. Always use scissors to start the cut in the excess seam allowance so that the cut fabric can start to sew under the needle, not at the knife. Side cutter attachments cannot be used to start the cut on fabrics like sergers can. Lift the presser foot to insert the precut fabric edge under the needle. The precut strip must reach back to the side cutter knife so it can continue to cut while the machine is sewing.

Brother Transparency Presser Foot "N" for decorative stitching Part #x53840301

Replacement Decorative Stitching Foot "N". For Brother and Babylock Embroidery and Sewing Machines.

Brother SA128 Snap-on Concealed/Invisible Zipper Foot for up to 7mm Zigzag Machines

For installation of concealed/invisible zippers easily and quickly. Accessory Model SA128. Compatible with all low shank sewing machines.

50 Pack of Brother SA155 Top Load Plastic Drop in Standard Rotary "L" Bobbins

50 Pack of Brother SA155 Top Load Plastic Drop in Standard Rotary "L" Bobbins

Brother SA184 Snap-on Metal Edge Joining Foot fits most wide bar ankle adaptors

Fits most Brother Machines. Used to easily join two pieces of fabric or attach lace or trim. Also used for narrow edge stitching and pintucks. Part # XC6441051.

Brother SA114 Snap-on Plastic Non-Stick Teflon Foot for up to 7mm Machines

For fabrics which may tend to stick to the bottom of the foot such as leather, vinyl, plastic, synthetics, ultrasuede etc. Compatible also with Brotherb PE-300S, PS, PC and ULT series. Compatible with Babylock Machines which are Made by Brother. Compatible with Babylock.

Brother Side Cutter for Zig Zag Embroidery Machines Part #80943001A

Side Cutter for Brother and Babylock 7mm Embroidery Machine. Cuts the fabric edge away while the machine sews. Use with straight stitch for French Seams. Use with zigzag for overcasting. Use with overlock stitch to sew, trim and overlock at the same time, like a serger.

10 Pack of Brother SA155 Top Load Drop-in Plastic Drop in Standard Rotary "L" Bobbins Part# 136492101

10 Pack of Brother SA155 Top Load Drop-in Plastic Drop in Standard Rotary "L" Bobbins Part# 136492101

Brother SA150 1/4" Pearls, Beads, & Sequins Top Application Foot Plastic

Pearl and Sequins Foot To attach beading to fabric. This foot is suitable for embellishing clothing with beads using threads with a diameter of up to 4mm. It is handy to attach beads or sequins to neckline, etc. Accessory Model SA150. Compatible with PS-2200 to PS-2500, PC-2800 to PC-8500.

Brother SA164 Snap-on Picot Edge Metal Foot for up to 7mm zigzag machines

Picot Horizontal FootFor shell effect when hemming, especially on lingerie.

Brother SA141 Snap-on Braiding Application All Metal Foot

Braiding Foot To attach braiding. This foot guides braiding for embellishment. It is used with braid up to 5 mm in width and attached it to the top of the fabric as it sews. Accessory Model SA141. Compatible with all our home-use sewing machines.

Brother SA161 Low Shank Screw-on Adjustable Zipper and Piping Foot

Brother SA161 Low Shank Screw-on Adjustable Zipper and Piping Foot

Brother SA160 Snap-on Metal Stitch Guide or Hem/Seam Edge Foot for up to 7mm Zigzag Machines

Built-in seam guide right on the foot extension, because not all needle plates have markings and it stays on top of fabric to follow previous stitch lines which may be to the right of the needle.

Brother SA110 Snap-on Cording All Metal Foot 3-Hole cording on top of fabric

Cording Foot To attach three or less cords or decorative threads. The foot works perfectly for attaching three cords or threads through grooves on clothing, household linens, etc. Compatible with: PS-2200 to 2500, PC-2800 to 8500.

Brother SA158 Snap-on Cording Foot up to 7-Hole Top Application for up to 7mm zigzag machines

Cording Foot for cording work with 7 cords. This foot makes embellishment edges, cuffs, collars, etc with 7 cords. This foot works with zigzag or decorative stitch mode. Stitch over all cords. Accessory Model SA158. Compatible with PS-2200 to 2500, PC-2800 to 8500.

Brother SA147 Open Toe Plastic Foot with 1/4" Flat Tunnel Underneath for Satin & Applique

Clear Plastic Open Toe Foot To attach appliqu� motifs. This plastic foot is perfectly fitted to appliqueing, matching pattern and etc. The open toe foot gives you greater visibility while sewing. Compatible with VX, XL, XR series up to 5mm zigzag.

Brother SA167 Snap-on Straight Stitch Metal Foot for up to 7mm Zigzag Machines

For straight stitch sewing. Also useful in sewing over seams to keep the needle going down the small hole in the foot so it doesn't glance off and hit something underneath.

20 Pack of Brother SA155 Top Load Plastic Drop-in Standard Rotary "L" Bobbins also for Babylock, Deco, White & Simplicity

20 Pack of Brother SA155 Top Load Plastic Drop-in Standard Rotary "L" Bobbins also for Babylock, Deco, White & Simplicity

Brother SA145 Snap-on Plastic Clearview Presser Foot with 1/4" Flat Tunnel Underneath - for up to 7mm Zigzag Machines

For optimum visiblity while sewing. It is ideal for topstitching, with decorative stitch, patchwork piecing, etc. Compatible with PE-300S, PS-1000 to 2500, PC-2800 to 8500.

Brother SA133 Screw on Shank Blind Stitch Foot for Machines with a Built-in Blindhem Stitch up to 7mm Zigzag

Adjustable for creating blind hems on a variety of fabrics. This foot is also handy for sewing fabric edges with a fixed seam allowance. Metal foot with plastic guide. The low shank presser foot adaptor with schew is required for use on PC-8200 and 8500. Also Compatible with PE-300S, PS-1000 to 2500, PC-2800 to 8500.

Brother SA143 Snap-on All Metal Ruffler Attachment for up to 7mm Zigzag Machines

Ruffles one layer of fabric by itself, or gathers one layer to another flat layer of fabric, for ruffled skirts to dust ruffles and other home decorating applications. Adjust depth of pleats and/or frequency of pleats on the ruffler attachment, as well as stitch length setting on your machine. Be sure to tighten your needle bar clamp screw tighter than usual and set stitch length where you get good feeding.

Brother SA138 High Shank 1/4" Seam Quilt Piecing Foot for the PQ1300/1500 Series

Part #XA7258001- Fits High Shank machines including Juki TL98 series.

SA163 Metal Bobbins for Brother Embroidery - Pack of 5

For use with machines that use the plastic SA155 bobbin. Metal bobbins are slightly heavier so they increase the bobbin tension slightly. Decreases the chance of bobbin thread showing on the right side of the embroidery.

Brother SA144 Snap-on Plastic Clearview Presser Foot with 1/4" Flat Tunnel Underneath for Satin Stitch & Applique up to 5mm Zigzag

For optimum visiblity while sewing. It is ideal for topstitching, with decorative stitch, patchwork piecing, etc. Compatible with VX, XL, XR series.

Brother SA120 Low Shank Screw-on Gathering Foot All Metal for Gathering Single Layer or Ruffling one layer to another flat layer

Gathering Foot for PS and PC Series Sewing MachinesTo gather one or two layers of lightweight fabric. Brother Gathering Foot SA120. To gather one or two layers of lightweight fabric. The adapter for low shank attachment is required for PC-8200/8500. Accessory Model SA120. Compatible with all our home-use sewing machines.

Brother SA107 Low Shank Screw-on Walking Foot Attachment for all 5mm Zig Zag machines

Walking Foot for PS Series Sewing MachinesFor sewing or quilting on fabrics which stick or tend to slip. Useful for sewing multiple layers as in quilting. For dependable feeding of multiple layers or fabrics through the interaction of upper and lower feed dogs. Compatible with PS-1000, 2000, all XL & XR models.

Brother SA125 Snap-on 1/4 or 1/8" inch Seam Foot, Metal Quilting Foot for all models

1/4-inch Quilting FootFor quilt and patchwork piecing with 1/4" or 1/8" seam allowance. For quilt and patchwork piecing with accurate seam allowance, 6.4 mm (1/4 inch) or 3.2 mm (1/8 inch). Accessory Model SA125. Compatible with all our home-use sewing machines.

Brother SA132 Quilting Guide for Parallel Stitching Attaches in Back of Presser Foot Holder

Quilt GuideAdjustable guide for perfect parallel stitching. Used with quilt guide. Accessory Model SA132. Compatible with all Brother Sewing Machines.

Brother Serger SA212 up to 1/2" Elastic Application Foot - All Metal Snap-on

Serger Elastic Application FootTo attach tapes and elastic to stretch fabrics up to 12mm in width. Automatically stretches and guides 6 mm to 12 mm wide elastic as you serge. This foot will also guide and serge narrow tapes and ribbons, without stretching.

Brother Serger SA211 up to 1/4" Pearl, Bead & Sequin Foot - Snap-on Metal with adjustable plastic guide

Serger Pearl Sequins FootTo attach pearls and sequins up to 5mm in diameter to fabric. Accommodates a 3 mm or 5 mm diameter strand of pearls, beads or sequing. Use this handy guide to serge cording or sequins to the edge of netting, lace, or any other fabric (great for stretch fabrics.

Brother X76661001 Replacement Blindhem Serger Foot - l Snap-on Metal with plastic adjustable Guide

Easy two or three-thread blind hemming can be accomplished using this foot to guide folded fabric for perfect blindhems.

Brother SA140 Low Shank Screw on Walking Foot attachment for 7mm Zig Zag Machines

Walking Foot for all 7mm Zigzag Brother and other low shank screw on presser bar systems. May require low shank adaptor for some Brother PC and ULT models. For sewing or quilting on fabrics which stick or tend to slip. Useful for sewing multiple layers as in quilting. For dependable feeding of multiple layers or fabrics through the interaction of upper and lower feed dogs. *The adpater for low shank attachments is required for use on PC-8200 and PC8500. Compatible with Babylock and Brother PS-2200 to 2500, PC-2800 to 8200 or 8500(requires low shank adaptor SA130 or 131).

Brother SA166 Walking Foot Attachment for Vertical Bobbin Low Shank Machines and Brother PE300S with 5mm Zig Zag

Brother SA166 Walking Foot Attachment for Vertical Bobbin Low Shank Machines and Brother PE300S with 5mm Zig Zag

Brother SA129 Low Shank Screw-on free motion Quilting/Darning/Embroidery Foot

Clear Quilting Foot (Screw on Foot)Spring action foot for darning, quilting or free-motion embroidery. Spring action foot for darning, quilting or free-motion embroidery. Its transparency gives an excellent view of your work. Compatible with low shank Brother machines. *The adapter #SA 130 is required for use on the PC-8200. Works on the PE 400D.

Brother Serger SA210 up to 1/8 inch Piping Application Foot - All Metal Snap-on

Home � Products � Accessories � Presser Feet � Serger � Piping Foot. Serger Piping FootFor sewing and piping two fabrics together. Accurately places piping within fabric seams for attractive and durable finishing. Interior seams can be finished with a three or four-thread overlock stitch.

Brother SA165 Screw-on FREE MOTION/Quilting/Darning/Embroidery/Monogramming Foot for PE300/400D

Quilting/Free Motion Foot for PE300SSpring action foot for darning, quilting or free-motion embroidery. (PE300S) and PE400D.

Brother SA221CV Coverstitch Hemming Set for 2340CV

Hemming set to make single or double fold hems. Use to quickly and easily hem garments, table runners or other home dec projects. The hem guide sews straight even hems on your cover stitch machine.

Brother SA222CV Coverstitch Bias Tape Holder for 2340CV

Bias Tape Holder for folding and attaching 12 mm (1/2") wide bias tapes. Use ready-made single fold bias tape (or make your own) to cover stitch over seams for decorative techniques or for making belt loops. Try using decorative threads in the looper to create decorative bias strips for pin weaving.

RWA5 High Shank, Screw-on Straight Stitch Walking Foot Attachment for Juki TL98 & Brother PQ1300/1500

Use on high shank machines with extension to right of needle bar clamp to support the fork of the walking foot. Does not work with some industrial single needle straight stitch machines like Juki, Brother, or Artisan without needle bar clamp extension to support articulating fork on walking foot. Same as Brother SA139/XA7253001, Juki A9150-E98-ZA0A & Singer Professional RWA5. Useful for machine quilting. Helpful when sewing velvet, leather, vinyl.

AlphaSew Inside Straight Stitch Presser Foot for Mini Walking Foot Machines

This straight sitch inside foot fit any mini walking foot staraight stitch and zigzag machines. Wide zigzag inner foot has to be replaced with this foot to use left or right zipper feet on zigzag portable walking foot machines.

AlphaSew PW200-LZF Left Hand Outside Zipper Foot for Mini Walking Machines

Left Hand Outside Zipper Foot for portable walking foot machines. For zigzag models requires changing inside foot with straight stitch foot .

AlphaSew PW200-RZF Right Hand Outside Zipper Foot for Mini Walking Machines

Right Hand Outside Zipper Foot for portable walking foot machines. For zigzag models requires changing inside foot with straight stitch foot .

Brother SA140 Low Shank Screw on Walking Foot attachment for 7mm Zig Zag Machines

Walking Foot for all 7mm Zigzag Brother and other low shank screw on presser bar systems. May require low shank adaptor for some Brother PC and ULT models. For sewing or quilting on fabrics which stick or tend to slip. Useful for sewing multiple layers as in quilting. For dependable feeding of multiple layers or fabrics through the interaction of upper and lower feed dogs. *The adpater for low shank attachments is required for use on PC-8200 and PC8500. Compatible with Babylock and Brother PS-2200 to 2500, PC-2800 to 8200 or 8500(requires low shank adaptor SA130 or 131).

Brother SA107 Low Shank Screw-on Walking Foot Attachment for all 5mm Zig Zag machines

Walking Foot for PS Series Sewing MachinesFor sewing or quilting on fabrics which stick or tend to slip. Useful for sewing multiple layers as in quilting. For dependable feeding of multiple layers or fabrics through the interaction of upper and lower feed dogs. Compatible with PS-1000, 2000, all XL & XR models.

Singer Quilter's Pack Model QP-1 with Low Shank Screw-on Walking Foot Attachment & Snap-on 1/4" Seam Foot

1/4" Seam Quilting Guide foot. Even feed screw-on walking foot attachment. Fits Singer Featherweight II only.

Brother SA139/RWA5 High Shank, Screw-on Straight Stitch Walking Foot Attachment for Juki TL98 & Brother PQ1300/1500

Use on high shank machines with extension to right of needle bar clamp to support the fork of the walking foot. Does not work with some industrial single needle straight stitch machines like Juki, Brother, or Artisan without needle bar clamp extension to support articulating fork on walking foot. Same as Brother SA139/XA7253001, Juki A9150-E98-ZA0A & Singer Professional RWA5. Useful for machine quilting. Helpful when sewing velvet, leather, vinyl.

Generic Low Shank Screw-on Walking Foot Attachment with Quilt Guide #P60444

Generic Low Shank Screw-on Walking Foot Attachment with Quilt Guide #P60444

Even Feed/Walking Foot - For Singer XL Machines

Free Shipping on this item! (use promotion code MAYFSA525) Even Feed/Walking Foot--This foot is used to sew plaids velours velvets ultra suede and other napped fabrics. Compatible with Singer Models: XL-150 XL-1000 XL-5000 XL-6000

Even Feed/Walking Foot

Free Shipping on this item! (use promotion code MAYFSA525) Even Feed/Walking Foot--This foot is used to sew plaids velours velvets ultra suede and other napped fabrics. Compatible with Singer Models: 2517 2950 3270 3343 4830 5000 5400 5700 5800 57000 CE-100 CE-200 Futura Quantum Futura

Even Feed/Walking Foot- Singer 117 & Featherwt II

Free Shipping on this item! (use promotion code MAYFSA525) Even Feed/Walking Foot--This foot is used to sew plaids velours velvets ultra suede and other napped fabrics. Compatible with Singer Models: 117 Featherweight II

Even Feed/ Walking Foot

Free Shipping on this item! (use promotion code MAYFSA525) Even Feed/Walking Foot--This foot is used to sew plaids velours velvets ultra suede and other napped fabrics. Compatible with Singer Models: 6500 2623 7300 3800 6038 1100 2638 Scholastic

Right Hand Outside Zipper Foot for Thompson PWZ 500 requires changing inside foot #5-232 now included

Right hand zipper foot will not fit PWZ500 if wider zigzag inner presser foot is not removed first and replaced with #5-232 narrower inner presser foot which we are including in this package.

SA172 High Shank Screw-on Very Narrow Straight Stitch All Metal Foot 40322SH

Very Narrow Foot. The SA172 narrow foot is that foot we wish we had for those tight corners, working up against a ridge, or other similar situations. This foot is a must-have for applying piping to home decor, craft and fashion sewing projects.

SA171 High Shank Screw-on Metal Gathering Foot to ease or slightly ruffle light weight fabrics

Gathering FootThe SA171 gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.